Contact
Email Me: HERE
Yamaha Truss Rod Covers
Please look on the Materials Page for Truss Rod Cover Materials or just ask if you don't see
something you'd like!
A note about these covers.
There are some variances on the mounting hole placement so please feel free to take a general
measurement for me to assure that you get the correct fit!
YAMAHA Tremolo Bars
Nice original style tremolo bars that fit the original RM-Pro (with Pop-in Bar), RM-Pro II (with
Pop-in Bar), Vintage Pro (with Pop-in Bar), and *Rockin' Magic II (Threaded Bar)* tremolos.
These are made from solid polished or brushed stainless steel or Brass.
A note about the brass bars.
They have a slight step that can be seen in the pic below because these are a metric bar size
and I have yet to find a good (dependable / reasonable) metric source for brass roundstock.
The step does not hurt a thing, and is hardly even noticeable but I just wanted you to be aware
of it.
TB-RMPro
$28.00
Fits the following 3 trems below:
RM-Pro,
RM Pro II
RM-Pro Tremolo Friction Collars
These are the perfect replacement for the Friction
Collars that seem to grow feet and walk away.
These are black anodized aluminum and will fit the
original RM-Pro (with Pop-in Bar).
Notice, I've removed the RM Pro II (only!)
from the list of tremolos that use this friction collar
because apparently, Yamaha had changed design
through production on these. If you'd like to take a shot
at ordering one, feel free, but I can not guarantee
that it will fit your RM Pro II Tremolo.
$20.00 Each
Black Anodized
Aluminum:
HWyfcr-1
RM-Pro Tremolo Bar Friction bushings
These are the Delrin bushing shown in the picture
below being pointed to by the black arrow.
Angled side faces down into the Tremolo bar socket.
This is for the bushing only!
By VERY popular demand, In the future,
I will be making the threaded outer metal collar
(Friction Screw) out of Stainless Steel for you.
$12.00 Each
HWyfb-1
Rockin'Magic II
Intonation Buttonhead Screws
As found on most SE and Early RGX Models
I had some questions about why there are
saddle "rollers" on this bridge as it doesn't
look like other Rockin Magic bridges. The
reason is, I machined the slots and installed
rollers myself to allow better string movement.
Sorry about any confusion.
.40 cents each
.40 cents each
Rockin'Magic II
Saddle Lockdown Flathead Screws
As found on most SE and Early RGX Models
I had some questions about why there are
saddle "rollers" on this bridge as it doesn't
look like other Rockin Magic bridges. The
reason is, I machined the slots and installed
rollers myself to allow better string movement.
Sorry about any confusion.
RM-Pro Tremolo
Intonation or Saddle/String Lockdown Screws
.40 cents each
RM-Pro Tremolo Locknut Screws
As found on most SE and RGX Models
Rockin'Magic String Lock Screws
As found on most SE and RGX Models
.50 cents each
HWyls-1
.50 cents each
HWyls-1
Yamaha SE, RGX Rear (Tremolo and Control Route)
Cover Plate Screws
.40 cents each screw
HWsc-8
$12.00
each
HWsw-1
Original "Paddle" style pickup and
boost switches
These are used as the pickup or phase switches.
Neck Plate Screws (4 Pieces) Phillips Head
Stainless Steel,
Size: #8 x 1-3/4"
Neck Plate Screws (4 Pieces) Phillips Head
Black,
Size: #8 x 1-3/4"
$1.50 Each
or
$5.00 for a set of 4
HWsc-25
$1.50 Each
or
$5.00 for a set of 4
HWsc-26
Vintage Pro
YAMAHA TRS Pro These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
YAMAHA Rockin' Magic II These are made from solid polished or brushed stainless steel
TB-RMagII
$28.00
Fits the following trem below:
Takeuchi / TRS-Pro / TRS 101 These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
Email Me: HERE
Yamaha Truss Rod Covers
Please look on the Materials Page for Truss Rod Cover Materials or just ask if you don't see
something you'd like!
A note about these covers.
There are some variances on the mounting hole placement so please feel free to take a general
measurement for me to assure that you get the correct fit!
YAMAHA Tremolo Bars
Nice original style tremolo bars that fit the original RM-Pro (with Pop-in Bar), RM-Pro II (with
Pop-in Bar), Vintage Pro (with Pop-in Bar), and *Rockin' Magic II (Threaded Bar)* tremolos.
These are made from solid polished or brushed stainless steel or Brass.
A note about the brass bars.
They have a slight step that can be seen in the pic below because these are a metric bar size
and I have yet to find a good (dependable / reasonable) metric source for brass roundstock.
The step does not hurt a thing, and is hardly even noticeable but I just wanted you to be aware
of it.
TB-RMPro
$28.00
Fits the following 3 trems below:
RM-Pro,
RM Pro II
RM-Pro Tremolo Friction Collars
These are the perfect replacement for the Friction
Collars that seem to grow feet and walk away.
These are black anodized aluminum and will fit the
original RM-Pro (with Pop-in Bar).
Notice, I've removed the RM Pro II (only!)
from the list of tremolos that use this friction collar
because apparently, Yamaha had changed design
through production on these. If you'd like to take a shot
at ordering one, feel free, but I can not guarantee
that it will fit your RM Pro II Tremolo.
$20.00 Each
Black Anodized
Aluminum:
HWyfcr-1
RM-Pro Tremolo Bar Friction bushings
These are the Delrin bushing shown in the picture
below being pointed to by the black arrow.
Angled side faces down into the Tremolo bar socket.
This is for the bushing only!
By VERY popular demand, In the future,
I will be making the threaded outer metal collar
(Friction Screw) out of Stainless Steel for you.
$12.00 Each
HWyfb-1
Rockin'Magic II
Intonation Buttonhead Screws
As found on most SE and Early RGX Models
I had some questions about why there are
saddle "rollers" on this bridge as it doesn't
look like other Rockin Magic bridges. The
reason is, I machined the slots and installed
rollers myself to allow better string movement.
Sorry about any confusion.
.40 cents each
.40 cents each
Rockin'Magic II
Saddle Lockdown Flathead Screws
As found on most SE and Early RGX Models
I had some questions about why there are
saddle "rollers" on this bridge as it doesn't
look like other Rockin Magic bridges. The
reason is, I machined the slots and installed
rollers myself to allow better string movement.
Sorry about any confusion.
RM-Pro Tremolo
Intonation or Saddle/String Lockdown Screws
.40 cents each
RM-Pro Tremolo Locknut Screws
As found on most SE and RGX Models
Rockin'Magic String Lock Screws
As found on most SE and RGX Models
.50 cents each
HWyls-1
.50 cents each
HWyls-1
Yamaha SE, RGX Rear (Tremolo and Control Route)
Cover Plate Screws
.40 cents each screw
HWsc-8
$12.00
each
HWsw-1
Original "Paddle" style pickup and
boost switches
These are used as the pickup or phase switches.
Neck Plate Screws (4 Pieces) Phillips Head
Stainless Steel,
Size: #8 x 1-3/4"
Neck Plate Screws (4 Pieces) Phillips Head
Black,
Size: #8 x 1-3/4"
$1.50 Each
or
$5.00 for a set of 4
HWsc-25
$1.50 Each
or
$5.00 for a set of 4
HWsc-26
Vintage Pro
YAMAHA TRS Pro These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
YAMAHA Rockin' Magic II These are made from solid polished or brushed stainless steel
TB-RMagII
$28.00
Fits the following trem below:
Takeuchi / TRS-Pro / TRS 101 These are made from solid polished or brushed stainless steel
TB-TRS
$28.00
