Contact
Copyright © 2023 Frets On The Net
Frets On The Net Quality custom parts.... ....built just for you.
Email Me: HERE
Kahler "Behind the Nut" String Lock Screws
Kahler "Behind the Nut" String Lock Screws with Allen Wrench
Fender System Series String Lock Replacement Screws
Fender System Series String Lock Replacement Screw with Allen Wrench
Fender System Series, Floyd Rose, Allen Wrench Alone
$1.50 each
Kahler "Behind the Nut" Allen Wrench
$1.50 each
Kahler "Floyd Style" Locking Nut Screws
Kahler "Floyd Style" Locking Nut Screws with Allen Wrench
.45 cents each screw
.45 cents each screw
.45 cents each screw
$2.50 a set (3 screws & Wrench)
$2.50 a set (3 screws & Wrench)
$2.50 a set (3 screws & Wrench)
Original Floyd Rose Special Tremolo Bars These will fit Original Floyd Rose, Floyd Rose Special, and Floyd Rose II tremolos with the socket for the collared style bars. These come with a new socket to install into your bridge plate in case yours is worn. Available in Gold, Chrome, Black, or Black for Left Handed. Black Left Or Right Chrome Gold $31.00TB-SFLR-B $31.00TB-SFLR-BL (*lefty)
Lock Nut & String Lock Screws & Wrenches
Fender System I Tremolo Bars
These are made from solid polished or brushed stainless steel only and will not rust peel or chip.
TB-SYS1 - $30.00 Mine are exactly like the original bar and just pop right in.
Please be aware of other companies selling bars for the System one, they are not the correct size and require permanent modification to your tremolo!
Solid Aircraft Aluminum tremolo bar Friction Collar for the Fender System 1 tremolo. These are a direct replacement and a much better upgrade as you do not need a separate tool to tighten the collar. Just tighten up the nicely knurled collar and put the bar where YOU want it! Natural and Black anodized aluminum now available!
$25.00 each HWSYS1FC
Natural Aluminum
or Black Anodized Aluminum
System I Trem arm bushings These are the plastic bushing that fits between the round, chrome friction nut and the arm socket in the base plate. Angled side faces up into the Friction Collar. The bushing is the black ring in the photo (right).
$15.00 each HWSYS1FB
Fender System I Stainless Steel Fine Tuners These are being phased out, only a few more left!
These are made from solid stainless steel and are not soft and weak. These are not original replacements, but have the exact thread size, and fit and function correctly.
Fender Elite Bass Stainless Steel Fine Tuners
These have domed thread ends and are made from solid stainless steel and are not soft and weak. These are not original replacements, but have the exact thread size, and fit and function correctly.
$8.00 each screw HWft-2B
$7.00 each screw HWft-2
Also available in sets of 6 for $32.00
System 1 Fine Tuner and Tremolo Bar Repairs Fine Tuner Repair: If you've found that you have stripped out the threads for your fine tuners, I can easily rethread these with a slightly larger size thread, and provide a fine tuner that will function like new again. I can either do just one, or all 6 for you. The total for this service for one is $15, or $50 for 6 fine tuners, plus the shipping back to you. If you have any questions, I'll be happy to help in any way I can! These are the Stainless Steel style fine tuner that will be used: Tremolo Bar Repair / Conversions: If you have missing or broken parts on your System 1 Tremolo, I can help get you back into action with a conversion service that I provide. I can help you (or do it for you) give your trem new life with a modern Floyd Rose Special Tremolo Bar! Read below if you're mechanically inclined and you're not afraid to use power tools. If you can use a drill and you're comfortable drilling out the tremolo socket hole in your bridge, you won't even have to send the bridge to me. All you have to do is be able to hold your bridge in a suitable vise or clamp and drill out the existing hole to a slightly larger size. TB-JT6CB(Black), TB-JT6CG(Gold), TB-JT6CS(Silver) or TB-JT6CLB(Lefty-Black) $31.00 each $37.00 each $30.00 each $31.00 each . If you need the Allen wrench (3mm) for the installation, I have those as well. $1.00 Read this if you'd rather have me do all the work for you! If you're not up to the task of doing it yourself, I can do it for you. All that is required is that you send the bridge to me and I'll take care of the rest for you. Cost of the service which includes the bar is $42.00 plus the shipping back to you.Email with any questions you may have!
Yes the bar is included!
Tremolo Bar Tips
Classic Style tips in Polished Brass And Aluminum $20.00 each
Mid-Point Style tips in Polished Brass And Aluminum $20.00 each
Mid-Point Style tips in Polished Aluminum = JCHMT-4A
Classic Style tips in Polished Aluminum = JCHCT-4A
Mid-Point Style tips in Polished Brass = JCHMT-4BR
Classic Style tips in Polished Brass = JCHCT-4BR
Mid-Point Style tips in Relic'd Brass = JCHMT-4RB
Classic Style tips in Relic'd Brass = JCHCT-4RB
Neck Plates The brass and aluminum are not clear coated This means that they will tarnish as it's brass, not gold plated. These are made from solid 1/8th inch thick stock. These are the standard Fender, Charvel Jackson Bolt pattern.
Solid Uncoated Brass Relic'd finish $18.00 HWnp-1
Solid Uncoated Brass Brushed Finish: $18.00 HWnp-2
Solid Brass Polished Finish: $18.00 HWnp-3
Black Anodized Aluminum Finish $17.00 HWnp-4
Solid Aluminum Polished Finish: $16.00 HWnp-5
Solid Uncoated Aluminum Brushed Finish: $15.00 HWnp-6
Black Plastic Backer Pads for the neck plates are here!! These will fit all my neckplates and other standard Strat, Jackson and Charvel both import and USA models. $3.00 each HWnp-7
Fender System II (2) and III (3) Tremolo Bar Conversions If you're tired of looking for a bar for that System 2 or 3, I can help by supplying a modern type Floyd Special bar that will fit right in the existing hole in the tremolo base plate. These do not lock the trems. There are no modifications that you must make, just unscrew the nuts that are holding in the existing socket and replace it with this one. Click for Tutorial for the System III(3) These should actually work for the Elite and Free Flyte as well but have not tested those yet. If yoiu’re interested in testing one, please let me know. Chrome Only Yes the bar is included!
System II (2) TB-SYS2CS - $30.00 System III (3) TB-SYS3CS - $30.00
If you need the Allen wrench (3mm) for the installation, see below ....
If you need the Allen wrench (3mm) for the installation, I have those as well.
$1.00
Aircraft Uncleared Aluminum Available in Satin, Polished or Brushed! $20 Each Ring
Solid Uncleared Brass Available in Satin, Polished or Brushed! $25 Each Ring
Beautiful Matte or Satin White or Black Plastic Available in Satin or Brushed! $16.00 Each Ring
Black Anodized Aluminum Available in Satin, or Brushed! $24.00 Each Ring
Fender Lace Dualies and Wide Range Rings These are a few of the Fender rings I can make for you. All the rings (Fender Lace Dualies and Wide Range Rings) below are 3/32nd thickness (as the originals were). If you’d like something different, just let me know the details and I can give you a quote for your specific applications. These are now available to be made in any material you see on the site and can be customized to fit Dimarzios, Duncans, Etc.!!
Fender “Wide Range” Rings
Fender Tele Deluxe Plus Lace Rings
These are available in the older Dual Pickup style that have the actual 3 height screw setup, and also the modern Lace pickups that have 3 holes on each side BUT, only the center height screw holes are threaded. Finish options shown above.
Original Lace Dually in Polished Aluminum
Original Lace Dually in White or Black Glossy Plastic
Original Lace Dually Coverted to Duncan Humbucker
Fender System I Saddle Locking Screws
These are the screws that lock your string saddle after setting the intonation.
$2.50 per set of 6 HWFsc-1
Examples of Other Fender Parts
Original Lace Dually Backsidewith with 3 Larger threaded Height Screw Holes
Modern Lace Dually Backside with only 2 threaded Smaller Height Screw Holes
$18.00 per set of 6 HWFsc-6
Fender System I Saddle Intonation Setting Screws
These are the 6 screws that set your string saddle intonation. This is a complete set of six screws in the correct Phillips head and full thread, finished to the 3 correct lengthsjust like the originals.
Fender Jazzmaster Pickup Ring Conversions Want a “regular” Pickup in your Jazzmaster?
Engraving is now available!
Aircraft Uncleared Polished Aluminum
Aircraft Uncleared Relic’d Aluminum
TB-SFLR-C $30.00
TB-SFLR-G $37.00
Original Lace Dually in Black Satin Anodized Aluminum
Pickup Ring Height Screws in Nickel For Fender Wide Range Original Pickups 4 Needed
$1.00 each screw HWsc-10SS
Fender System One Contemporary String Lock Plates These are to replace those long lost locking plates.
Fender System One Contemporary String Lock Plates and Screws Same as above but has three Allen Screws included for you.
Fender System One Contemporary String Lock Plates and Screws and Allen Wrench Same as above but has three Allen Screws and The Allen Wrench included for you.
$15.00 each HWFsc-2 Set of 3
$17.00 each HWFsc-3 Set of 6
$19.00 each HWFsc-4 Set of 3
Fender System I Black Steel Fine Tuners
These are made from steel and are black plated. These are not soft and weak like the aluminum replacements you find online. These are not original replacements, but have the exact thread size, and fit and function correctly.
$6.00 each screw HWft-22
Also available in sets of 6 for $28.00
Fender System One Contemporary Upper String Lock Plates These are the 3 Upper Plates that are glued into the underside of the string lock. These can get lost so these replace those perfectly. String Lock NOT included, picture for reference only
$7.00 HWFsc-4U Set of 3
Fender System I Chrome Steel Fine Tuners
These are made from steel and are Chrome plated. These are not soft and weak like the aluminum replacements you find online. These are not original replacements, but have the exact thread size, and fit and function correctly.
$6.00 each screw HWft-22C
Also available in sets of 6 for $28.00